Clear Epoxy Resin for Floor Coating
Product Description:
MC-ER2180A/ER2182B is a two-component transparent epoxy resin
compound that cures at room temperature. It has the following
characteristics: high temperature resistance, high hardness, low
mixing viscosity, good de-aeration; long working time at room
temperature, excellent mechanical properties after curing, low
shrinkage ; The cured product has good light transmittance and
other advantages.
Applications:
It is mainly used for thin coating, 3D floor coating.
Physical Properties
| Item No. | Part A MC-ER2180 | Part B MC- ER2182 |
| Appearance | Clear liquid | Clear liquid |
| Density 25℃,g/cm3 | 1.1～1.2 | 0.9～1.0 |
| Viscosity 25℃,cps | 5000-5500 | 500-550 |
| Mix Ratio by weight | 2 A : 1 B |
| Hardness | 82-84 Shore D |
| Usable time25℃ 100g | 30-45 Minutes |
| Curing condition 25℃ 100g | 8-10 hours |
| Curing condition in winter | 18-24 hours |
The above performance data is typical data measured in a laboratory
environment with a temperature of 25°C and a humidity of 70%. It is
for customer reference only.
Using Instruction:
1. The product to be potted needs to be kept dry and clean.
2.Weigh resin part A and part B hardener according to the given
weight ratio into the prepared cleaned container, fully mixed the
mixture again the container wall by clockwise to avoid incomplete
curing.
3.Take the resin according to the usable time and dosage of mixture
to avoid wasting. When the temperature is below 15 ℃, please heat
part A first and then mix it with part B (part A will be thicken in
low temperature );
4.When the relative humidity is higher than 85%, the surface of the
cured mixture will absorb moisture in the air, and form a layer of
white mist in the surface, so when the relative humidity is higher
than 85%, is not suitable for room temperature curing, suggest to
use the heat curing.
Precautions
- The products must be stored in a closed and airtight environment
under the condition of 25°C relative humidity <70%.
- Since part B is easy to absorb water vapor and lead to
deterioration, the packaging barrel must be tightly sealed with the
cover.
- The more the amount mixed together, the faster the reaction will
be, the faster the curing speed will be, and it may be accompanied
by a lot of heat, please pay attention to control the mixing amount
at one time, because due to the accelerated reaction, its use time
will also be shortened, and the mixed glue should be used up in a
short time as much as possible;
- During the curing process, please keep the environment clean to
prevent impurities or dust from falling onto the surface of the
uncured glue
- When using the product, glasses and other necessary labor
protection supplies are recommended.
Packaging:
1kg, 5kg per bottle-20kg per carton or 200kg per drum
Other package please contact our sales team for customize.
Storage And Shelf Life
- Store at the temperature of 25°C or cool and dry place. Avoid from
sunlight, high temperature or high humidity environment.
- Use up as soon as possible when opened. It is strictly forbidden to
expose to the air for a long time after it is opened to avoid
affecting the quality of the products.
- The shelf life is 10 months in the room temperature of 25°C.
