Home > Polyurethane Liquid Rubber >

Two Component Urethane Rubber for Panel Stone Mold Making with 50 Tons Daily Production and UV Resistant Room Temperature Vulcanization

Product Categories

MINGCHENG GROUP LIMITED

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Buy cheap Two Component Urethane Rubber for Panel Stone Mold Making with 50 Tons Daily Production and UV Resistant Room Temperature Vulcanization from wholesalers

Two Component Urethane Rubber for Panel Stone Mold Making with 50 Tons Daily Production and UV Resistant Room Temperature Vulcanization

Ask Lasest Price
Price :	4

Add to Cart

Product Details
Company Profile

Two Component Urethane Rubber for Panel Stone Mold Making with 50 Tons Daily Production and UV Resistant Room Temperature Vulcanization

Description of 1:1 Two Component Liquid Urethanes Rubber for Panel Stone Mold Making

It is two-part compounds that vulcanizes at room temperature.With 100% polyurethane resin properties. Containing no contain
solvent,after curing, it will be forming a is light yellow clear also glittering layer.it's used extensively in industry, voltage
transformer potting. A/B after curing.It has excellent weatherability and resistance to UV - irradiation.Environmentally product,when in the sunshine,it can't change the color within short time.

It is a type of mold making rubber made from a two-component system (base plus curative; A+B) available in a hardness range of very soft to medium - usually from 35 Shore A to 90 Shore.

It is suitable for manufactured stone, concrete wall panel, cultured stones and architectural elements.

Importtant : Pre Mix the Part B before using. After dispensing Part A and Part B into mixing container, mix thoroughly for at least 3 minutes making sure that you scrape the sides and bottom of the mixing container several times. If Mixing Large Quantities at one time, use a mechanical mixer for 3 minutes followed by careful hand mixing for one minute as directed above. Then, pour entire quantity into a new, clean mixing container and do it all over again. Although this product is formulated to minimize air bubbles in your the cured rubber, vacuum degassing will further reduce entrapped air. A pressure casting technique using a pressure chamber can yield totally bubble free molds.

Application of 1:1 Two Component Liquid Urethanes Rubber for Panel Stone Mold Making

Packing and delivery of 1:1 Two Component Liquid Urethanes Rubber for Panel Stone Mold Making:

5kg/drum , 20kg/drum , 200kg/drum

Our Company:

Two Component Liquid Urethanes Rubber for Panel Stone Mold Making

Product Tags:

Two Component Urethane Rubber for Panel Stone Mold Making with 50 Tons Daily Production and UV Resistant Room Temperature Vulcanization

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	MINGCHENG GROUP LIMITED
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Polyurethane Liquid Rubber products from this supplier

Find Similar Products By Category:

Rubber & Plastics

Hot Searches:

MINGCHENG GROUP LIMITED

Two Component Urethane Rubber for Panel Stone Mold Making with 50 Tons Daily Production and UV Resistant Room Temperature Vulcanization

Two Component Urethane Rubber for Panel Stone Mold Making with 50 Tons Daily Production and UV Resistant Room Temperature Vulcanization

Two Component Urethane Rubber for Panel Stone Mold Making with 50 Tons Daily Production and UV Resistant Room Temperature Vulcanization

50 Tons Daily Production Urethane Rubber

UV Resistant Urethane Rubber

Room Temperature Vulcanization Liquid Rubber

Two Component Urethane Rubber for Panel Stone Mold Making with 50 Tons Daily Production and UV Resistant Room Temperature Vulcanization